How to Hang Your Holiday Lights

Table of Contents

• Introduction
• Tip 1: Hang the Lights on the Roof
• Tip 2: Hang the Lights on the Sides
• Tip 3: Hang the Lights Around the Door
• Tip 4: Finishing Touches
• FAQ
• Conclusion

Introduction

It's Christmas time in 2020, and what better way to get into the festive spirit than by decorating your house with holiday lights? In this blog, we will provide you with expert tips on how to hang your holiday lights like a pro. Whether you want to create a gingerbread effect or simply enhance the overall appearance of your house, we've got you covered. So let's dive in!

Tip 1: Hang the Lights on the Roof

If you want to create a gingerbread effect on your house, start by hanging the lights on the roof. Measure the length you need and cut custom-sized lights. Use C7 lights for the eaves and C9 lights for the roof. To secure the lights, make sure to smash the vampire plug to puncture and insulate it. Then, close it to ensure a secure connection. Once that's done, you need to get power to the roof. Simply connect the lights to an existing power source and plug them in. This will eliminate the need for an extension cord.

Tip 2: Hang the Lights on the Sides

After you've finished hanging the lights on the roof, it's time to move on to the sides of your house. For this step, you'll need C7 lights. Slide the lights into the vinyl siding, making sure they fit snugly. Unlike C9 lights, C7 lights don't require clips to stay in place. Simply slide them in and continue the pattern all around the sides of your house.

Tip 3: Hang the Lights Around the Door

To complete the gingerbread effect, you'll also want to hang lights around your door. Again, use C7 lights for this step. Measure the length you need and make sure to have even lights on both sides of the door. Insert the lights into the vinyl siding, following the same process as before. This will create a seamless and professional look.

Tip 4: Finishing Touches

Now that you've hung lights on the roof, sides, and around the door, it's time to add the finishing touches. To ensure a continuous power supply, use jumpers to connect the different sections of lights. This will allow you to run the lights without the need for clips, nails, or staples. Remember to keep safety in mind and avoid exposing bare wires that people could touch.

FAQ

Q: Can I use C9 lights for the sides of my house?

A: No, C9 lights are not suitable for the sides of your house as they require clips to stay in place. For a seamless look, use C7 lights instead.

Q: How do I hide the wires?

A: You can tuck the wires behind the vinyl siding to make them less visible. Alternatively, you can use white stranded wire or opt for a white wire color that blends in with the background.

Q: Can I break off the bulbs to make it easier to slide the lights into the vinyl siding?

A: Yes, you can break off the bulbs to make it easier to insert the lights into the vinyl siding. However, remember that this technique only works with C7 lights.

Conclusion

There you have it! By following these expert tips, you can easily hang your holiday lights and give your house a festive and professional look. Remember to use the appropriate lights for each section of your house, secure the connections properly, and hide the wires for a clean finish. We hope these tips have been helpful, and we wish you a joyful and bright holiday season!